A 7075-T6 billet aluminum skid plate engineered to protect the most vulnerable part of your e-moto — the motor. Built with a 10mm thick bash plate tested to withstand over 6,000 lbs of force, replaceable bash plates, and strategic ventilation to keep the motor cool under sustained abuse.
Fitment:
Talaria Sting MX3 / MX4 / MX5
NOTE: Will not fit EBMX XTA Core Motor. Torp Controller covers require slight modification to fit. The V2 can be seen HERE. This V1 will be discontinued as it will not work with all new aftermarket motors.
The perfect strike angle for logs, rocks, and obstacles keeps you moving instead of getting bogged down. The extended tail section adds protection from perpendicular strikes, and each section is easily removable for routine maintenance. The replaceable bash plate swaps out in minutes if it takes a hit. Lifetime Warranty on Side Rails — if they ever bend, we replace them for free. (Not applicable to bash plates; replacements available upon request.)
Installation Note: Use blue medium thread locker on all hardware. Mounting bolts are T20 Torx; recommended torque value is 2.6 Nm / 1.92 ft-lb / 23 in-lb. Barely hand-tight with thread locker applied correctly will hold securely and remain removable.
Guides
Installation Note: Use blue threadlocker on all hardware. Mounting bolts are 2.5mm Allen bolts; recommended torque value is 2.6 Nm / 1.92 ft-lb / 23 in-lb.
