Surron 220 Caliper Spacer kit

Upgrade your Surron to 220MM Rotors

 This caliper spacer sets your brake exactly where it needs to be so you can run larger rotors with clean pad contact and a solid lever feel. Use it to step a 203 rotor up to 220, or take a 220 setup to 240 for more heat capacity and control on long descents and hard stops. It delivers the correct offset for the upgrade without frame or fork mods.

• Made From 6061 T6 Aluminum
  
• Fits: Surron Light Bee, Talaria XXX / MX4, Eride Pro SS 1.0/2.0
  
• Fits both Front & Rear Brake Caliper Mounts
• Adapts 203 mm post mount to 220 mm rotor
• Pairs well with our custom 220MM Rotors

What comes in the box?

 We include 1 Caliper Spacer, and 2 M6 x 30mm Stainless Steel bolts! It is recommended to install these with a light thread locker like blue loctite.

Install Guide

1. Remove the 2 bolts from your stock caliper
2. Slide our 220mm spacer in under your stock caliper
3. Put a conservative amount of thread locker onto the bolts
4. Toque both bolts evenly to your bikes torque spec
5. Take her for a rip!

Why Upgrade?

 If you want dependable braking on a Surron, Talaria, or Eride Pro without a full caliper swap, this Surron 220 Caliper Spacer Kit is the move. The difference from 203mm to 220mm rotors may sound slight, But the difference is felt immensely! 220 over 203 gives you better heat dissipation, a larger "lever" when you caliper grabs onto your rotor giving you stronger brake feel & more certain performance!

Ships from USA!